Gas Burner Controller G790 – Shokouh Electronics

The G-790 gas burner control box is designed to control forced- drought gas burners.
The control box is well protected by a tough transparent polycarbonate casing. The plug in control box incorporates the electronical timer, flame check and reset
The reset button, an indicator lamp and the central screw fastening are situated on the upper part of the control box.

Technical Data
Supply voltage	220v (±15%) 50HZ
Fuse rating	10A (rapid) or 6A (slow)
Power consumption	3 VA
Max. Current per output terminal	4A
Max. Current total	6A
Pre-purge time	approx.40Sec
Insulation standard	IP44
Ignition safety time	3sec
Reset delay after shut down	2sec
Permissable ambient temperature	-10^oc…+ 60^oc
Min. Ionisation current required	7A
Net weight	180g
Mounting attitude	any